LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 443 (Can Gateway) >> System Description >> Diagnosis System (Can Gateway) >> CONSULT Function >> Self Diagnostic Result

Self Diagnostic Result

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC Index .

Freeze Frame Data (FFD) 

When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.

Item name

Display item

IGN counter

(0 - 39)

The number of times that ignition switch is turned ON after the DTC is detected is displayed.

  • When "0" is displayed: It indicates that the system is presently malfunctioning.
  • When except "0" is displayed: It indicates that system malfunction in the past is detected, but the system is presently normal.
    NOTE: Each time when ignition switch is turned OFF to ON, numerical number increases in 1 -> 2 -> 3...38 -> 39. When the operation number of times exceeds 39, the number do not increase and "39" is displayed until self-diagnosis result is erased.