CONSULT Function: Configuration

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Function		Description
Read / Write Configuration	Before Replace ECU	Reads the vehicle configuration of current CAN gateway. Saves the read vehicle configuration.
	After Replace ECU	Writes the vehicle configuration with saved data.
Manual Configuration		Writes the vehicle configuration with manual selection.

CAUTION: Follow the instructions listed below. Failure to do this may cause malfunctions to the CAN gateway.:

When replacing CAN gateway, you must perform "Read / Write Configuration" or "Manual Configuration" with CONSULT.
Complete the procedure of "Read / Write Configuration" or "Manual Configuration" in order.
If you set incorrect "Read / Write Configuration" or "Manual Configuration", incidents might occur.
Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
Never perform "Read / Write Configuration" or "Manual Configuration" except for new CAN gateway.