LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 442 (Seats (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Seatback Thermal Electric Device Sensor >> Diagnosis Procedure >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SEATBACK THERMAL ELECTRIC DEVICE SENSOR SIGNAL 
    1. Turn ignition switch ON.
    2. Check voltage between seatback thermal electric device harness connector and ground.

      (+)

      (-)

      Condition

      Voltage (V)

      (Approx.)

      Seatback thermal electric device

      Connector

      Terminal

      Driver side

      B212

      3

      Ground

      Climate controlled seat operated

      1 - 5

      Passenger side

      B309

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    GO TO 2.

  2. CHECK SEATBACK THERMAL ELECTRIC DEVICE SENSOR CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect climate controlled seat control unit connector and seatback thermal electric device connector.
    3. Check continuity between climate controlled seat control unit harness connector and seatback thermal electric device harness connector.

      Climate controlled seat control unit

      Seatback thermal electric device

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      Driver side

      B204

      3

      B212

      3

      Yes

      Passenger side

      B305

      B309

    4. Check continuity between climate controlled seat control unit harness connector and ground.

      Climate controlled seat control unit

      Ground

      Continuity

      Connector

      Terminal

      Driver side

      B204

      3

      No

      Passenger side

      B305

    Is the inspection result normal?

    YES

    Replace climate controlled seat control unit. Refer to Exploded View .

    NO

    Repair or replace harness.

  3. CHECK SEATBACK THERMAL ELECTRIC DEVICE SENSOR GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect climate controlled seat control unit connector and seatback thermal electric device connector.
    3. Check continuity between climate controlled seat control unit harness connector and seatback thermal electric device harness connector.

      Climate controlled seat control unit

      Seatback thermal electric device

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      Driver side

      B204

      18

      B212

      4

      Yes

      Passenger side

      B305

      B309

    4. Check continuity between climate controlled seat control unit harness connector and ground.

      Climate controlled seat control unit

      Ground

      Continuity

      Connector

      Terminal

      Driver side

      B204

      18

      No

      Passenger side

      B305

    Is the inspection result normal?

    YES

    GO TO 4.

    NO

    Repair or replace harness.

  4. CHECK SEATBACK THERMAL ELECTRIC DEVICE SENSOR 

    Check seatback thermal electric device sensor.

    Refer to Component Inspection .

    Is the inspection result normal?

    YES

    Check intermittent incident. Refer to Intermittent Incident .

    NO

    Replace seatback thermal electric device. Refer to Seatback Thermal Electric Device .