LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 440 (Power Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2098: Ignition Relay On Stuck >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION 
    1. Turn ignition switch ON.
    2. Turn ignition switch OFF and wait 1 second or more.
    3. Turn ignition switch ON.
    4. Perform "Self Diagnostic Result" of "IPDM E/R" using CONSULT.

    Is DTC B2098 displayed?

    YES

    Refer to Diagnosis Procedure .

    NO

    Inspection End.