Diagnosis Procedure
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM CONFIGURATION OF AROUND VIEW MONITOR CONTROL UNIT
Perform configuration of around view monitor control unit. Refer to Work Procedure .
GO TO 2.
- PERFORM DTC CONFIRMATION PROCEDURE AGAIN
CONSULT
- Turn ignition switch ON.
- Erase DTC.
- Select "Self Diagnostic Result" mode of "AVM".
- Check DTC.
Is DTC U1305 detected?
YES
Replace around view monitor control unit. Refer to Removal and Installation .
NO
Inspection End.