Fail Safe
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
The fail-safe mode may be activated if the following symptoms are observed.
|
Operating in fail-safe mode |
Malfunction Item |
Related DTC |
Diagnosis |
|
Only manual functions operate normally. |
CAN communication |
U1000 |
|
|
CONTROL UNIT |
U1010 |
||
|
EEPROM |
B2130 |
||
|
Only manual functions, except door mirror, operate normally. |
UART communication |
B2128 |
|
|
Only manual functions, except seat sliding, operate normally. |
Seat sliding output |
B2112 |
|
|
Only manual functions, except seat reclining, operate normally. |
Seat reclining output |
B2113 |
|
|
Only manual functions, except steering tilt, operate normally. |
Steering column tilt output |
B2116 |