DTC Index

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CONSULT display	Timing^*1		Item	Reference
CONSULT display	Current malfunction	Previous malfunction	Item	Reference
CAN COMM CIRCUIT [U1000]	0	1-39	CAN communication	DTC Logic
CONTROL UNIT [U1010]	0	1-39	Control unit	DTC Logic
SEAT SLIDE [B2112]	0	1-39	Seat slide motor output	DTC Logic
SEAT RECLINING [B2113]	0	1-39	Seat reclining motor output	DTC Logic
STEERING TILT [B2116]	0	1-39	Tilt motor output	DTC Logic
UART COMM [B2128]	0	1-39	UART communication	DTC Logic
EEPROM [B2130]	0	1-39	EEPROM	DTC Logic

^*1 :

0: Current malfunction is present
1-39: Displayed if any previous malfunction is present when current condition is normal. The numeral value increases by one at each IGN ON to OFF cycle from 1 to 39. The counter remains at 39 even if the number of cycles exceeds it. However, the counter is reset to 1 if any malfunction is detected again, the normal operation is resumed and the ignition switch is turned from OFF to ON.