LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Automatic Transaxle (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U0300: Can Communication Data >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition switch is ON, the data length transmitted from each control unit is shorter than the specified length and the status continues for 2 seconds or more.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

U0300

CAN COMM DATA

(Internal Control Module Software Incompatibility)

Diagnosis condition

When the ignition switch is ON

Signal

CAN communication data

Threshold

The data length transmitted from each control unit is shorter than the specified length and the status

Diagnosis delay time

Continues for 2 seconds or more