DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Always drive vehicle at a safe speed.

PREPARATION BEFORE WORK (1)
1. Customer reports "judder" (shake, shudder, single or multiple bumps or vibration).
2. DTC P17F1 is stored.
NOTE: Both of the above conditions must exist, otherwise repair is not authorized.

Is "P17F1" detected?

YES

GO TO STEP 2 .

NO

Inspection End.
PREPARATION BEFORE WORK (2)
Does customer report "judder" (shake, shudder, single or multiple bumps or vibration)?

YES

Go to Diagnosis Procedure .

NO

Inspection End. Do not erase DTC. Return vehicle to customer.