Component Inspection (Manual Mode Switch)
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- MANUAL MODE SWITCH
Check continuity between CVT shift selector connector terminals.
CVT shift selector
Condition
Continuity
Terminal
7 - 11
Manual shift gate position (neutral)
Existed
Other than the above
Not existed
8 - 11
Selector lever: DOWN (- side)
Existed
Other than the above
Not existed
9 - 11
Selector lever: UP (+ side)
Existed
Other than the above
Not existed
10 - 11
Manual shift gate position
Not existed
Other than the above
Existed
Is the inspection result normal?
YES
INSPECTION END
NO
Replace the CVT shift selector assembly due to malfunction in manual mode switch. Refer to Removal and Installation .