Component Description

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

No.	Component		Function
1.	ICC steering switch		Refer to ICC Steering Switch
2.	Combination meter		Refer to Component Parts Location
3.	Lane camera unit (if equipped)		Refer to Lane Camera Unit
4.	ICC brake hold relay		Refer to ICC Brake Hold Relay
5.	ABS actuator and electric unit (control unit)	Pump/motor	Refer to ABS Actuator and Electric Unit (Control Unit) (Type 1) or ABS Actuator and Electric Unit (Control Unit) (Type 2).
		Motor relay
		Actuator relay (main relay)
		ABS IN valve
		ABS OUT valve
		Cut valve 1
		Cut valve 2
		Pressure sensor
6.	Distance sensor (ICC sensor)		Refer to Distance Sensor (ICC Sensor)
7.	TCM		Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication. Shift position signal Current gear position signal
8.	ECM		Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication. Accelerator pedal position signal Engine speed signal Mainly receives the following signal from ABS actuator and electric unit (control unit) via CAN communication. Target throttle position signal
9.	Warning buzzer		Refer to Warning Buzzer
10.	ADAS control unit 2		Refer to ADAS Control Unit 2
11.	Brake pedal position switch		Refer to Brake Pedal Position Switch / Stop Lamp Switch
12.	Stop lamp switch
13.	ADAS control unit		Refer to ADAS Control Unit