Lane Camera Unit Handling

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

To maintain the proper operation of the FEB systems and prevent a system malfunction, be sure to observe the following:

Always keep the windshield clean.
Do not attach a sticker (including transparent material) or install an accessory near the lane camera unit.
Do not place reflective materials, such as white paper or a mirror, on the instrument panel. The reflection of sunlight may adversely affect the lane camera unit's detection capability.
Do not strike or damage the areas around the camera unit. Do not touch the camera lens or remove the screw located on the camera unit.