Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Clean dust on the parking brake shoes with a vacuum dust collector to minimize the hazard of air borne particles or other materials.

Remove the rear wheel and tire using power tool. Refer to Adjustment .
Remove disc rotor. Refer to Removal and Installation .
CAUTION: Parking brake must be in the completely released position.

If disc rotor cannot be removed, remove as follows:

Secure the disc rotor with wheel nuts and remove the adjusting hole plug.

Using a suitable tool, rotate adjuster (1) in direction (B) to retract and loosen parking brake shoe.

Courtesy of NISSAN NORTH AMERICA, INC.

Remove anti-rattle pins, retainers, anti-rattle springs, adjuster spring and return spring.
CAUTION: Do not drop the removed parts.
Remove parking brake shoes, adjuster assembly and toggle lever.
CAUTION:
- The parking brake shoes for the front side are made of different materials from those for the rear side. Do not misidentify them when removing.
- Do not drop the removed parts.