Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION: Do not reuse the rear suspension arm nuts at the rear suspension member.

Perform the final tightening of the parts under unladen conditions with tires on the ground.
Check the wheel sensor harness for proper connection. Refer to Removal and Installation - Rear Wheel Sensor .
Check the wheel alignment. Refer to Inspection and Adjustment .
Adjust the neutral position of the steering angle sensor. Refer to Description .