LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 423 (Rear Suspension) >> Removal And Installation >> Radius Rod >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheel and tire using power tool. Refer to Adjustment .
  2. Remove the radius rod nut and bolt from the rear knuckle using power tool.
  3. Remove the radius rod bolt from the rear suspension member using power tool.
  4. Remove the radius rod.
scientia non olet · About LEMON Manuals