Component Inspection (Rear Blower Motor Relay)

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK REAR BLOWER MOTOR RELAY

Remove rear blower motor relay. Refer to appropriate System Wiring Diagram .

Check continuity between rear blower motor relay terminals 3 and 5, then 6 and 7 when voltage is supplied between terminals 1 and 2.

Courtesy of NISSAN NORTH AMERICA, INC.

Terminal		Voltage	Continuity
3	5	ON	Yes
		OFF	No
6	7	ON	Yes
		OFF	No

Is the inspection result normal?

YES

Inspection End.

Replace rear blower motor relay.