Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ICC BRAKE HOLD RELAY

Apply battery voltage to ICC brake hold relay terminals 1 and 2, and then check for continuity under the following conditions:

Courtesy of NISSAN NORTH AMERICA, INC.

ICC brake hold relay		Condition	Continuity
Terminals
3	5	When the battery voltage is applied	Yes
		When the battery voltage is not applied	No

Is the inspection result normal?

YES

Inspection End.

Replace ICC brake hold relay.

CHECK STOP LAMP RELAY

Apply battery voltage to stop lamp relay terminals 1 and 2, and then check for continuity under the following conditions:

Courtesy of NISSAN NORTH AMERICA, INC.

Stop lamp relay		Condition	Continuity
Terminals
3	5	When the battery voltage is applied	Yes
		When the battery voltage is not applied	No

Is the inspection result normal?

YES

Inspection End.

Replace stop lamp relay.