Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal,

CAUTION: Do not reuse the lower strut nuts.

Be sure tab (A) on strut mount insulator is positioned as shown below.

Courtesy of NISSAN NORTH AMERICA, INC.

: Front
Be sure the nuts (A) for the front strut are facing front of vehicle.

Courtesy of NISSAN NORTH AMERICA, INC.

: Front
Check wheel alignment. Refer to Inspection and Adjustment .
Adjust neutral position of steering angle sensor. Refer to Description .