Removal and Installation: Installation
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the front wiper arm mount as shown. This will reduce the possibility of wiper arm looseness.
- Operate front wiper motor to move the front wiper to the auto stop position.
- Adjust the front wiper blade position. Refer to Adjustment .
- Install the front wiper arm (LH/RH) and the front wiper arm nut (LH/RH).
- Install the front wiper arm cap (LH/RH).
- Check that the wiper blades stop at the specified position. Refer to Adjustment .