LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 413 (Transfer Case) >> Unit Disassembly And Assembly >> Drive Pinion >> Disassembly

Drive Pinion: Disassembly

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove pinion bearing assembly mounting bolts.
    GNSJSDIA3951Z-951Courtesy of NISSAN NORTH AMERICA, INC.
  2. Lightly tap companion flange with a plastic hammer to remove drive pinion assembly (1).
    GNSJSDIA3952Z-952Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the O-ring from pinion bearing.
  4. Remove the pinion lock nut.
  5. Remove drive pinion from pinion bearing assembly with drift (A) (commercial service tool) and bearing separator (B) (commercial service tool).
    GNSJSDIA3953Z-953Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove adjusting shim.
  7. Remove companion flange.
  8. Remove the dust cover.
  9. Remove the oil seal.
  10. Perform inspection after disassembly. Refer to Inspection .
scientia non olet · About LEMON Manuals