LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 413 (Transfer Case) >> Unit Disassembly And Assembly >> Drive Pinion >> Adjustment >> Backlash

Drive Pinion: Adjustment: Backlash

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bolt to the companion flange.
  2. Fit a dial indicator onto the bolt (A).
    GNSJSDIA2501Z-501Courtesy of NISSAN NORTH AMERICA, INC.
  3. Measure the circumference backlash of the companion flange.

    Backlash

    : Refer to Backlash .
    • If outside the standard, disassemble the transfer assembly to check and adjust each part.
scientia non olet · About LEMON Manuals