Component Parts Location
|
A. |
Rear final drive assembly |
B. |
Inside storage room |
|
No. |
Component parts |
Reference/Function |
|
1 |
Combination meter (AWD warning icon/display) |
Transmits/receives the signals for control of AWD system via CAN communication line to/from AWD control unit. For transmitting/receiving mainly signals, refer to System Description Refer to Component Parts Location for detailed installation location. |
|
2 |
Steering angle sensor |
Transmits/receives the signals for control of AWD system via CAN communication line to/from AWD control unit. For transmitting/receiving mainly signals, refer to System Description Refer to Steering Angle Sensor (Type 1) or Steering Angle Sensor (Type 2). |
|
3 |
ABS actuator and electric unit (control unit) |
Transmits/receives the signals for control of AWD system via CAN communication line to/from AWD control unit. For transmitting/receiving mainly signals, refer to System Description Refer to ABS Actuator and Electric Unit (Control Unit) (Type 1) or ABS Actuator and Electric Unit (Control Unit) (Type 2). |
|
4 |
TCM |
Transmits/receives the signals for control of AWD system via CAN communication line to/from AWD control unit. For transmitting/receiving mainly signals, refer to System Description Refer to Component Parts Location (RE0F10J) for detailed installation location. |
|
5 |
ECM |
Transmits/receives the signals for control of AWD system via CAN communication line to/from AWD control unit. For transmitting/receiving mainly signals, refer to System Description Refer to Component Parts Location (VQ35DD) for detailed installation location. |
|
6 |
Front wheel sensor |
Wheel Sensor and Sensor Rotor (Type 1) or Wheel Sensor and Sensor Rotor (Type 2) |
|
7 |
Rear wheel sensor |
|
|
8 |
AWD solenoid |
|
|
9 |
Electric controlled coupling |
|
|
10 |
AWD control unit |