LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 413 (Transfer Case) >> Removal And Installation >> AWD Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. Refer to Exploded View .
  2. Remove storage box. Refer to Removal and Installation .

    SYMBOL

    : Front
  3. Remove AWD control unit bolts (SYMBOL ).
    GNSALDIA0278Z-278Courtesy of NISSAN NORTH AMERICA, INC.
  4. Disconnect AWD control unit harness connector.
  5. Remove AWD control unit (1).
scientia non olet · About LEMON Manuals