Removal and Installation: Installation

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Tighten AWD control unit bolts to specified torque.

AWD control unit bolts

: 10.1 N.m (1.0 kg-m, 7 ft-lb)

CAUTION:

Do not drop or shock AWD control unit.

When replacing AWD control unit perform, "ADDITIONAL SERVICE WHEN REPLACING AWD CONTROL UNIT". Refer to Description .