Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Remove the shift selector handle. Refer to CVT SHIFT SELECTOR .
Remove the center console upper side finisher LH and RH. Refer to Exploded View .
Remove the shift selector finisher. Refer to Exploded View .
Lift the shift selector finisher and disconnect the harness connectors.
Remove the shift selector finisher from vehicle.

Courtesy of NISSAN NORTH AMERICA, INC.
Remove the drive mode select switch (2) from the shift selector finisher (1) by prying the locking tabs, and push the switch through the top-side.