Seat Belt Retractor

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Removal

Remove the third row seat. Refer to Removal and Installation .
Pull back the lower anchor bolt cover and remove the seat belt lower anchor bolt.
CAUTION: Before removing the seat belt lower anchor bolt, note the positions of washers and spacers for correct installation.
Remove the back pillar finisher. Refer to Removal and Installation .
Remove the D-ring anchor bolt.
CAUTION: Before removing the D-ring anchor bolt, note the positions of washers and spacers for correct installation.
Remove the seat belt retractor bolts and the seat belt retractor.

Installation

Installation is in the reverse order of removal.

Tighten the D-ring anchor bolt, seat belt lower anchor bolt, and the seat belt retractor bolts to specification.
Make sure the D-ring anchor operates freely.
Always perform an inspection after repair to make sure the system is functioning within specifications. Refer to Inspection .