LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 408 (Instrument Panel) >> Unit Disassembly And Assembly >> Center Console Rear Finisher >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove center console rear finisher by releasing clips and pawls using a suitable tool.
  2. Remove rear center ventilator duct screws (A), then remove the rear center ventilator duct (1).
    GNSDB124390Courtesy of NISSAN NORTH AMERICA, INC.
  3. Release rear center ventilator grille assembly pawls using a suitable tool and remove.
  4. Remove rear blower control.
  5. Remove center console rear finisher upper bracket screws, then remove the center console rear finisher upper bracket.
  6. Remove center console rear finisher lower bracket screws, then remove the center console rear finisher lower bracket.
  7. Remove power socket. Refer to Removal and Installation .
  8. Remove AC 120V outlet (if equipped). Refer to Removal and Installation .
  9. Remove 2nd row heated seat switches (LH/RH) (if equipped).
  10. Remove rear auxiliary input jacks (if equipped). Refer to Removal and Installation .
scientia non olet · About LEMON Manuals