Removal and Installation: Removal
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Remove instrument side finisher (LH) (1) using a suitable tool.
- Remove instrument lower panel LH screw (A).
- Remove hood lock release handle from instrument lower panel LH. Refer to Exploded View .
- Remove data link connector from instrument lower panel LH.
- Release instrument lower panel LH clips and pawls using a suitable tool.
: Metal clip
: Pawl
- Disconnect aspirator hose from instrument lower panel LH.
- Disconnect harness connectors and remove instrument lower panel LH.