Removal and Installation: Removal
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Remove instrument side finisher (RH) using a suitable tool.
- Remove glove box assembly lower screws (A).
 Courtesy of NISSAN NORTH AMERICA, INC.
|
- Open glove box lid, then remove the glove box assembly upper screws (A).
 Courtesy of NISSAN NORTH AMERICA, INC.
|
- Disconnect the harness connectors from the glove box assembly and remove.