Component Inspection
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SEAT BELT BUCKLE SWITCH
- Turn ignition switch OFF.
- Disconnect the seat belt buckle switch LH connector.
- Check continuity between the seat belt buckle switch LH terminals 3 and 4.
3- 4
When seat belt is fastened
: Continuity should not exist.
When seat belt is unfastened
: Continuity should exist.
Is the inspection result normal?
YES
Inspection End.
NO
Replace the seat belt buckle switch LH. Refer to Removal and Installation .