Component Function Check
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HAZARD SWITCH SIGNAL BY CONSULT
CONSULT DATA MONITOR
- Turn ignition switch ON.
- Select HAZARD SW of BCM (FLASHER) DATA MONITOR item.
- While operating the hazard switch, check the monitor status.
Monitor item
Condition
Monitor status
HAZARD SW
Hazard switch
ON
On
OFF
Off
Is the inspection result normal?
YES
Hazard switch circuit is normal.
NO
Refer to Diagnosis Procedure .