Component Function Check

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select INTELLIGENT KEY of BCM using CONSULT.
Select REQ SW-DR, REQ SW-AS in DATA MONITOR mode.
Check that the function operates normally according to the following conditions.

Monitor item	Condition		Status
REQ SW -DR	Driver side door request switch	Pressed	ON
		Released	OFF
REQ SW -AS	Passenger side door request switch	Pressed	ON
		Released	OFF

Is the inspection result normal?

YES

Front door request switch is OK.

Refer to Diagnosis Procedure .