Diagnosis Procedure
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ECM IGNITION, POWER AND GROUND CIRCUITS
Check ECM ignition power and ground circuits. Refer to Diagnosis Procedure (VQ35DD).
Is the inspection result normal?
YES
Replace ECM. Refer to Removal and Installation (VQ35DD). GO TO 2.
NO
Repair or replace harness or connectors.
- INSPECTION
- Turn ignition switch ON.
- Select "Self-diagnostic result" mode with CONSULT.
- Touch "ERASE".
- Perform vehicle remote start operation.
Does DTC B261B return?
YES
Replace BCM. Refer to Removal and Installation .
NO
Inspection End.