LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 400 (Exterior Lighting System) >> Unit Disassembly And Assembly >> Front Combination Lamp >> Disassembly and Assembly - Early Production >> Disassembly

Disassembly and Assembly - Early Production: Disassembly

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
CAUTION:
  • Disconnect the negative battery terminal or remove the fuse.
  • Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb.
  • Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of the lamp.
  1. Remove front combination lamp. Refer to Removal and Installation .
  2. Rotate front turn signal lamp socket counterclockwise and remove.
  3. Remove front turn signal lamp bulb from front turn signal lamp socket.
scientia non olet · About LEMON Manuals