Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DISTANCE SENSOR (ICC SENSOR) POWER SUPPLY CIRCUIT
Check voltage between distance sensor (ICC sensor) harness connector and ground.
(+)
(-)
Condition
Standard voltage
Voltage
(Approx.)
Distance sensor (ICC sensor)
Ignition switch
Connector
Terminal
E245
8
1
OFF
0 - 0.1 V
0 V
ON
9.5 - 16 V
Battery voltage
Is the inspection result normal?
YES
GO TO 2
NO
Repair the distance sensor (ICC sensor) power supply circuit.
- CHECK DISTANCE SENSOR (ICC SENSOR) GROUND CIRCUIT
- Turn the ignition switch OFF.
- Disconnect the distance sensor (ICC sensor) connector.
- Check for continuity between distance sensor (ICC sensor) harness connector and ground.
Distance sensor (ICC sensor)
Ground
Continuity
Connector
Terminal
E245
1
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Repair the distance sensor (ICC sensor) ground circuit.