LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Cruise Control System (DTC/Circuit Diagnosis)) >> DTC / Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL CONSULT

    1. Turn the MAIN switch of ICC system ON.
    2. Select "Self Diagnostic Result" mode of "LASER/RADAR".
    3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" mode of "LASER/RADAR".

    Is "U1010" detected as the current malfunction?

    YES

    Replace the distance sensor (ICC sensor). Refer to Removal and Installation .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals