LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Cruise Control System (DTC/Circuit Diagnosis)) >> DTC / Circuit Diagnosis >> DTC C1B5D: FEB Ope Count Limit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SELF DIAGNOSTIC RESULT 

    SYMBOL CONSULT

    1. Turn ignition switch OFF.
    2. Turn ignition switch ON.
    3. Select "Self Diagnostic Result" mode of "LASER/RADAR".
    4. Check if the "C1B5D" is detected as the current malfunction in "Self Diagnostic Result" mode of "LASER/RADAR".

    Is "C1B5D" detected as a current malfunction?

    YES

    Replace the distance sensor (ICC sensor). Refer to Removal and Installation .

    NO

    Perform ICC system action test. Refer to Description .

scientia non olet · About LEMON Manuals