LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Cruise Control System (DTC/Circuit Diagnosis)) >> DTC / Circuit Diagnosis >> DTC C1A39: Steering Angle Sensor >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 

    If DTC "C1A39" is displayed with DTC "U1000", first diagnose the DTC "U1000".

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Logic .

    NO

    GO TO 2.

  2. CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF DIAGNOSTIC RESULTS 

    SYMBOL CONSULT

    Check if any DTC is detected in "Self Diagnostic Result" mode of "ABS".

    Is any DTC detected?

    YES

    Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index .

    NO

    Replace the distance sensor (ICC sensor). Refer to Removal and Installation .

scientia non olet · About LEMON Manuals