Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ADAS CONTROL UNIT SELF DIAGNOSTIC RESULTS
CONSULT
1. Select "Self Diagnostic Result" mode of "ICC/ADAS".
2. Check if "U1000" is detected along with "C1A17" in "Self Diagnostic Result" mode of "ICC/ADAS".
Is "U1000" detected?

YES

Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Logic .

NO

Replace distance sensor (ICC sensor). Refer to Removal and Installation .