LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 394 (ADAS Control Unit (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC C1A40: System Switch Circuit >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start the engine and wait for approximately 10 minutes or more.
    2. Perform "All DTC Reading" with CONSULT.
    3. Check if "C1A40" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1A40" detected as the current malfunction?

    YES

    Refer to Diagnosis Procedure .

    NO

    Refer to Intermittent Incident .

scientia non olet · About LEMON Manuals