DTC Confirmation Procedure
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC PRIORITY
If DTC "C1A24" is displayed with DTC "U1000", first diagnose the DTC "U1000".
Is applicable DTC detected?
YES
Perform diagnosis of applicable. Refer to DTC Logic .
NO
GO TO 2.
- CHECK DTC REPRODUCE (1)
- Start the engine.
- Turn the MAIN switch of ICC system ON.
- Wait for approximately 5 minutes or more after shifting the selector lever to "P" position.
- Perform "All DTC Reading" with CONSULT.
- Check if the "C1A24" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".
Is "C1A24" detected as the current malfunction?
YES
Refer to Diagnosis Procedure .
NO
GO TO 3.
- CHECK DTC REPRODUCE (2)
- Wait for approximately 5 minutes or more after shifting the selector lever to "N" position.
- Perform "All DTC Reading".
- Check if the "C1A24" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".
Is "C1A24" detected as the current malfunction?
YES
Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: INSPECTION END