Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
The vehicle causes hunting when the ICC system is active.
- PERFORM SELF DIAGNOSTIC RESULT OF ECM
CONSULT
- Select "Self Diagnostic Result".
- Check if DTC is detected in "Self Diagnostic Result" mode of "ENGINE". Refer to DTC Index .
Is any DTC detected?
YES
GO TO 3
NO
GO TO 2
- CHECK DISTANCE SENSOR (ICC SENSOR)
- Check the vehicle driving conditions. Refer to Diagnosis Procedure .
- Check the distance sensor (ICC sensor) for contamination, foreign materials, or cracks. Refer to Diagnosis Procedure .
Inspection End.
- REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace malfunctioning parts identified by the self-diagnosis result.
GO TO 4
- CHECK ICC SYSTEM
- Erase the "Self Diagnostic Result", and then perform "Self Diagnostic Result" mode again after performing the action test. (Refer to Description for action test.)
- Check that the ICC system is normal.
Inspection End.