LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 388 (Around View Monitor System) >> Removal And Installation >> Side Camera >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door mirror rear finisher. Refer to Removal and Installation .
  2. Remove the screws (A) and remove the turn signal lamp (1) from the door mirror (2).
    GNSALLIA2013Z-013Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the screw (A) from camera finisher (1).
    GNSALLIA2017Z-017Courtesy of NISSAN NORTH AMERICA, INC.
  4. Using a suitable tool release pawls and remove camera finisher (1).
    GNSALLIA2018Z-018Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL : Pawl

  5. Remove the screws (A) and remove side camera (1) from camera finisher (2).
    GNSALLIA2019Z-019Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals