Cowl Top Cover

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Removal

Remove front wiper arms (LH/RH). Refer to Removal and Installation .
Release the cowl top seal clips, then remove the cowl top seal.
Release the clips and pawls using a suitable tool and remove hood ledge finisher (1).

Courtesy of NISSAN NORTH AMERICA, INC.

: Pawl
Release the pawls, then remove cowl top side trim covers (1) (LH/RH).

Courtesy of NISSAN NORTH AMERICA, INC.

: Pawl
Disconnect front washer tube connector.
Remove cowl top cover clips.
Pull forward to release cowl top cover (1) and remove.

Courtesy of NISSAN NORTH AMERICA, INC.
Remove the following parts (if necessary) after removing cowl top cover.
- Front washer nozzle (LH/RH)
- Front washer tube

Installation

Installation is in the reverse order of removal.