Checking Drive Belts - Early Production
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
|
1. |
Drive belt auto-tensioner |
2. |
Generator |
3. |
A/C compressor |
|
4. |
Drive belt |
5. |
Crankshaft pulley |
A. |
Indicator |
|
B. |
Range when new drive belt is installed |
C. |
Possible use range |
D. |
View D |
|
|
Engine front |
WARNING:
Inspect and check the drive belt with the engine off.
- Visually check entire drive belt for wear, damage or cracks.
- Check that the drive belt auto-tensioner indicator is within the possible use range.NOTE:
- When new drive belt is installed, the drive belt auto-tensioner indicator should be within the new drive belt range.
- Check the drive belt auto-tensioner indicator when the engine is cold.
- If the drive belt auto-tensioner indicator is out of the possible use range or belt is damaged, replace drive belt.