LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 384 (Seats) >> Removal And Installation >> Side Air Bag Module >> Side Air Bag Module >> Notes

Side Air Bag Module: Notes

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • If the vehicle has been involved in a collision and the side air bag module has deployed, the seatback pad and seatback trim must be replaced.
  • Do not leave any objects (screwdrivers, tools, etc.) on the seat during repair. It can lead to personal injury if the side air bag module should accidentally deploy.
  • Always work from the side or back of the seatback, do not work in front of seat.
  • Do not attempt to disassemble the side air bag module.
  • Handle the side air bag module carefully. During removal, always hold the side air bag module, do not let it hang by the wire harness.
  • Do not use air tools or electric tools for servicing the seat assembly.
  • Do not insert any objects into the side air bag module.
  • Do not expose the side air bag module to temperatures exceeding 93 deg.C (200 deg.F).
  • Do not expose the side air bag module to any oil, grease, detergent or water.
  • Do not damage the chute, connectors, retainers, clips, module harness or the side air bag module.
  • Before servicing, turn ignition switch OFF, disconnect both battery terminals then wait at least three minutes.
scientia non olet · About LEMON Manuals