Removal and Installation: Removal
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument lower panel LH. Refer to Removal and Installation .
- Remove three screws (A, B) that retain the lower switch carrier (2).
(1)
: Upper switch carrier
(C)
: Upper switch carrier screws
- Release upper (B) and lower (C) pawl using a suitable tool (A), then remove the warning system switch (1) from the lower switch carrier.
(2)
: Heated steering wheel switch (if equipped)
(3)
: AC 120V outlet main switch (if equipped)
(4)
: Headlamp aiming switch (if equipped)