LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 375 (Audio, Visual & Navigation System (INFINITI INTOUCH)) >> Removal And Installation >> MULTIFUNCTION Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove preset switch. Refer to Removal and Installation .
  2. Remove screws securing multifunction switch.
  3. Release pawls and detach multifunction switch using suitable tool.
  4. Disconnect harness connector (1) from multifunction switch.
    GNSALIIA1146Z-146Courtesy of NISSAN NORTH AMERICA, INC.
  5. Remove multifunction switch from instrument panel assembly.
  6. Remove screws (A) securing multifunction switch.
    GNSALIIA0574Z-574Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals