Connecting Rod
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Unit: mm (in)
|
Items |
Grade1 |
Standard |
Limit |
|
Center distance |
144.15 - 144.25 (5.68 - 5.68) |
-- |
|
|
Bend [per 100 (3.94)] |
-- |
0.15 (0.0059) |
|
|
Torsion [per 100 (3.94)] |
-- |
0.30 (0.0118) |
|
|
Connecting rod small end inner diameter |
23.980 - 24.000 (0.9441 - (0.9449) |
||
|
Connecting rod bushing inner diameter2 |
Grade No. 0 |
22.000 - 22.006 (0.8661 - 0.8664) |
-- |
|
Grade No. 1 |
22.006 - 22.012 (0.8664 - 0.8666) |
-- |
|
|
Connecting rod big end diameter (Without bearing) |
55.000 - 55.013 (2.1654 - 2.1659) |
-- |
|
|
Side clearance |
0.20 - 0.35 (0.0079 - 0.0138) |
0.40 (0.0157) |
|
1 : Always check with the Parts Department for the latest parts information.
2 : After installing in connecting rod.