Removal and Installation: Removal
WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the air cleaner and air duct. Refer to AIR CLEANER AND AIR DUCT .
- Remove the battery tray and battery tray support. Refer to Removal and Installation .
- Remove CVT fluid charging pipe. Discard O-ring.CAUTION: Do not reuse O-ring.
- Disconnect the "S" connector, and the "B" terminal harness.
- Remove the starter motor bolts, then remove the starter motor.